Faults - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

Faults

Note
Faults and malfunctions occurring during the warranty period and requiring repair work on
the geared motor must be remedied only by Technical Support.
If faults without a clearly identifiable cause occur after the warranty period has elapsed,
consult Technical Support.
If you need the help from Technical Support, please have the following information ready:
• Rating plate data
• Nature and extent of the fault
• Suspected cause.
Note
Damage to the machine caused by faults
• Correct the cause of the fault as specified in the remedial measures section.
• Repair any damage to the machine/motor.
Note
When operating the motor with a converter, refer also to the operating instructions of the
frequency converter if electrical faults occur.
• If changes occur with respect to normal operation or faults, determine the cause using the
"Possible faults" table.
• If you have identified the cause, attempt to resolve the fault using the "Key – fault causes
and remedial measures" table.
• In this regard, observe the relevant chapter in the documentation associated with the
components of the complete drive system
• Even in test operation, never disable protective functions or devices
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA
8
135