Vibration Response - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

Mounting

4.11 Vibration response

4.11 Vibration response
Vibratory load
For perfect function and to comply with the 1FG1 servo geared motor specification (in
particular, the bearing service life) the vibration values specified in the following table must
not be exceeded.
Table 4- 21
Vibration velocity /
Axial vibration acceleration /
Radial vibration acceleration /
Select the measuring points according to ISO 10816-1, Section 3.2. The vibration values
must not exceed the specified limits at any measuring point.
Figure 4-11
The vibration acceleration is evaluated in the frequency band from 10 to 2000 Hz. Whereby,
the maximum peak value in the time range is considered.
To evaluate the vibration velocity, the measuring equipment must fulfill the requirements of
ISO 2954.
106
Vibration values
V according to ISO 10816
rms
a
peak axial
a
peak radial
Measuring points for vibration values
Max. 4.5 mm/s
25 m/s
2
50 m/s
2
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA