4.10
Mount the oil expansion unit
The oil expansion unit equalizes changes in the oil volume caused by temperature
fluctuations in operation.
The oil expansion unit is required
● at high input speeds
● in mounting position M4 (motor top)
The size of the supplied oil expansion unit depends on the gearbox.
Table 4- 20
Unit size
Unit volume
Gearbox size
Note
Selecting the oil expansion unit
Contact the Siemens Service Center for final selection of the oil expansion unit.
The unit is supplied as a mounting kit.
Note
Attaching the oil expansion unit before commissioning
Before commissioning the gearbox, replace the pressure vent valve that is already installed
with the provided oil expansion unit.
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA
Oil expansion units and corresponding gearboxes
Size 1
0.05 l
FZ 39 - 89
K 39 - 109
B 39 - 49
C 69 - 89
4.10 Mount the oil expansion unit
Size 2
1.5 l
FZ.129
K 129 - 149
Mounting
103