Siemens SIMOTICS S-1FG1 Operating Instructions Manual page 163

Injury as a result of suspended loads
When being dismantled and transported, the motor can cause injury as a result of its
movement.
• Only use perfectly functioning hoisting and load suspension equipment dimensioned to
• Pay careful attention to possible movement when the motor is released.
• Do not stand under suspended loads or in their slewing range.
• When placing down the motor, ensure that it cannot roll.
Injuries caused by liquids when draining and environmental pollution
When draining, liquids can cause injuries, such as burns, chemical burns, irritation. Spilt oil
can make floor surfaces slippery and pollute the environment.
• Allow the liquid to cool down.
• Use a sufficiently large collection container.
• Avoid liquids coming into contact with the skin. Wear suitable personnel protection
• Have materials on hand to soak up leaked liquids and prevent areas from being
Dismantling the motor
Note
The rotor in a motor containing permanent magnets must only be removed by the
manufacturer.
• Contact the Siemens Service Center
WW).
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA
WARNING
carry the motor load.
CAUTION
equipment, e.g. protective eyewear, gloves.
slippery.
Decommissioning and disposal
(https://support.industry.siemens.com/cs/?lc=de-
10.1 Safety instructions
161