Siemens SIMOTICS S-1FG1 Operating Instructions Manual page 38

Description
2.7 Mounting and options
Releasing the brake
Procedure
①
● Press the manual release handle in the direction of the NDE. The spring-loaded brake is
mechanically released.
You have neutralized the braking force.
❒
Securing the manual brake release
In the unactuated state, the manual release handle must be in the vertical position, see
figure. Only in this position is the brake fully closed and the full braking effect ensured. The
manual release handle can only be removed in the vertical position.
Procedure
Figure 2-3
1. Place the manual release handle in the vertical position
2. Remove the manual release handle.
You have secured the spring-loaded brake against unintended actuation.
❒
36
Manual release handle
Removing the manual release handle of the spring-loaded brake
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA