Recommended Lubricants - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

Service and maintenance
9.2 Inspection and maintenance
①
②
T
I
Figure 9-10
Grease service life of roller bearing greases
Roller bearings and the clearance in front are filled with sufficient grease.
Under approved operating conditions and ambient temperatures, no regreasing is required.
We recommend that the grease in the bearings is also renewed when the oil or shaft sealing
rings are replaced.
9.2.4.8

Recommended lubricants

Used lubricants only have conditional approval
The used lubricants are not or only conditionally approved for use in the foodstuff or
pharmaceutical industry.
Use only lubricants with USDA (United States Department of Agriculture) H1 / H2 approval
for deployment in the foodstuff or pharmaceutical industry.
The released and recommended lubricants are listed in the T 7300 Operating Instructions.
154
Mineral oil
Synthetic oil
Oil-bath steady-state temperature in °C
Oil change interval in operating hours in h
Guide values for oil change intervals
WARNING
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA