Table of Contents
Advertisement
8.4.24. Reload factory default IP settings
Description: After issuing this command over serial connection the router will reload the
factory default IP setup.
Command {IP_CONFIG=!}
Response
Parameters after successful command execution:
Info: IP settings can NOT be changed with this protocol command via Ethernet connection, only
via serial port. To change the IP settings via Ethernet, use the Lightware Device Controller
software (section
can be reloaded by the front panel buttons as well (section 4.3.5).
8.4.25. Load DHCP IP settings (only IP address!)
Description: After issuing this command over serial connection the router will inquire IP
address with DHCP.
Command {IP_CONFIG=D}
Response
Parameters after successful command execution:
Info: IP settings can NOT be changed with this protocol command via Ethernet connection, only
via serial port. To change the IP settings via Ethernet, use the Lightware Device Controller
software (section
setting can be reloaded by the front panel buttons as well (section
8.4.26. View LAN versions
Description: Shows information about the LAN interface.
Command {LAN_VER=?}
Response (MAC_ADDR=<mac>)CrLf
Page 60 / 89
Format
(Changing●IP●
configuration...)CrLf
(DONE!)CrLf
or
(FAILED!)CrLf
Parameter
IP address
port number
Subnet mask
Gateway
5.9.1
on page 38) or the built-in website (section 6.4). Default settings
Format
(Changing●IP●
configuration...)CrLf
(DONE!)CrLf
or
(FAILED!)CrLf
Parameter
IP address
port number
Subnet mask
Gateway
5.9.1
on page
38
or the built-in website (section
Format
(WEB_VER=<ver1>)CrLf
(SERVER_VER=<ver2>)CrLf
Example
→ {ip_config=!}
(Changing IP
←
configuration...)CrLf
(DONE!)CrLf
or
←
Value
192.168.254.254
10001
255.255.0.0
0.0.0.0
Example
→ {ip_config=D}
(Changing IP
←
configuration...)CrLf
(DONE!)CrLf
or
←
Value
Acquired with DHCP
unchanged
unchanged
unchanged
Example
→ {lan_ver=?}
(MAC_ADDR=00-20-4A-E3-1D-E42)CrLf
←
(WEB_VER=1.4.0)CrLf
←
(SERVER_VER=1.1.5)CrLf
←
Section 8. Programmers reference
(FAILED!)CrLf
(FAILED!)CrLf
6.4
on page 48). Default
4.3.5
on page 22).
Advertisement
Table of Contents
