Details Of The Print Starting Trigger Control Command - Star Micronics Line Thermal Printer Specifications

3.12.

Details of the Print Starting Trigger Control Command

This command is for models equipped with an expansion control function for page control of line unit commands, by
controlling the image buffer by page.
ESC GS g 0 m n
[Name]
Print starting trigger
[Code] ASCII ESC GS
Hex. 1B
Decimal 27
[Defined Area] m = 0, n = 0
[Initial Value] ---
[Function] Starts printing when there is unprinted data in the image buffer.
It is prohibited to send this command while in the raster mode.
ESC GS g 1 m n
[Name]
Print starting timer
[Code] ASCII ESC GS
Hex. 1B
Decimal 27
[Defined Area] m = 0, 0 ≤ n ≤ 255
[Initial Value] Depends on the model
[Function] Sets the print starting timer specified at n x 10 msec.
The print starting timer starts measuring from the point where the print data reception stops, and
measures up to the set print starting timer.
When the set print starting timer is reached, the printer starts printing if there is unprinted data in
the image buffer.
It is prohibited to send this command while in the raster mode.
n
0
1 to 255
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
g 0 m n
1D 67 30 m n
29 103 48 m n
g 1 m n
1D 67 31 m n
29 103 49 m n
Operating Mode
Print starting timer = initial value
Print starting timer n x 10 msec.
3-115