Star Micronics Line Thermal Printer Specifications page 39

ESC C 0 n
[Name] Set page length to n x 24 mm units
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] 1≤n≤22
[Initial Value] (Form feed amount initial value x 42)
[Function] The position whereat this command is processed is considered the top of the page and sets the
page length to (n x 24 mm).
This command cancels the bottom margin setting when setting page length.
The page length set using this command is unaffected by changing the form feed amount later.
Moving to the top of the page is performed using the following commands.
• Form feed command (FF):
• Cutter command (ESC d n):
• Raster command (ESC * r B):
• Error cancel operations:
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
C 0 n
43 00 n
67 0 n
3-23
Executes a form feed.
Sets cutter position at top of page.
Sets top of page when quitting raster mode.
Sets position when quitting error cancellation operations
at top of page.