Star Micronics Line Thermal Printer Specifications page 118

2) Simple Auto Logo Function
The simple Auto Logo function is preset and executes the following operations using the print cut command under the
current system as a trigger.
1. Start up the simple Auto Logo function using the current system cut command as a trigger
2. Center alignment command process
3. Print Logo 2
4. Feed paper to cutting position and execute a partial cut
5. Print Logo 1
6. Recovers position alignment command to setting prior to execution of the simple Auto Logo
With the simple Auto Logo function, the logo number of the logo to be printed is decided in advance.
********************
MACDONALDS
********************
1.CHEESEBURGER $2.00
2.COKE $1.00
--------------------------------------
TOTAL $3.00
Current System Print Data
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
1. Easy Auto Logo startup by trigger
o f cutting command.
2. Center alignment
3. Executes Logo 2 printing
4. Feeds paper to cutting position
and performs partial cut.
5. Executes Logo 1 printing
6. Recovery of position alignment
3-102
Header
***************
********************
M ACDONALDS
MACDONALDS
********************
***************
1.CHEESEBURGER $2.00
1. CHEESBUGER $2. 00
2.COKE $1.00
2. CO KE $1. 00
--------------------------------------
----------------------
TOTAL $3.00
TO TAL $3. 00
Footer
Header
********************
MACDONALDS
Logo 1
Current
System
Print Data
Logo 2
Logo 1