Star Micronics Line Thermal Printer Specifications page 78

ESC ? LF NUL
[Name] Reset printer (execute self print)
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] - - -
[Initial Value] - - -
[Function] Hardware resets the printer and executes on self print.
After sending this command, the next data is not sent until the printer is online (in a state wherein it
can receive data).
When resetting the printer, the following processes are performed.
I/F
Parallel
RS-232C
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
? LF NUL
3F 0A 00
63 10 0
Mode Process
- - - BUSY output
DTR mode DTR mark output
Xon/Xoff mode Xoff output
3-62