Star Micronics Line Thermal Printer Specifications page 77

ESC GS # m N n1 n2 n3 n4 LF NUL
[Name] Set memory switch
[Code] ASCII ESC GS
Hex. 1B
Decimal 27
[Defined Area] m = 87, 84, 44, 43, 45, 64 ( m = "W", "T", ",", "+", "-", "@" )
48≤n1≤57 ("0"≤n1≤ "9") , 65≤n1≤70 ("A" ≤ n1≤ "F"), 97≤n1≤102 ("a"≤n1≤ "f")
48≤n2≤57 ("0"≤n2≤ "9") , 65≤n2≤70 ("A"≤n2≤ "F"), 97≤n2≤102 ("a"≤n2≤ "f")
48≤n3≤57 ("0"≤n3≤ "9") , 65≤n3≤70 ("A"≤n3≤ "F"), 97≤n3≤102 ("a"≤n3≤ "f")
48≤n4≤57 ("0"≤n4≤ "9") , 65≤n4≤70 ("A"≤n4≤ "F"), 97≤n4≤102 ("a"≤n4≤ "f")
Specification A
48≤N≤57 ("0"≤N≤ "9") , 65≤N≤70 ("A"≤N≤ "F"), 97≤N≤102 ("a"≤N≤ "f")
Specification B
48≤N≤57 ("0"≤N≤ "9") , 65≤N≤70 ("A"≤N≤ "F"), 97≤N≤102 ("a"≤N≤ "f")
N = 85 ("U") User defined area
[Initial Value] - - -
[Function] Sends command to write after defining memory switch using the definition command specified by
the following classes.
Memory switch information defined by the command to write is written to the volatile memory.
When writing to the volatile memory by the command to write, the printer executes a reset.
This command exists in models that have the specifications of A and B indicated in the above
defined areas.
Models having specifications B can register any 16 bit data by specifying N = 85 ("U"). (See the
"Special Appendix, Command Table per Model" for details per model.)
Functions
Definition data write and reset
Definition data write and reset and
self print
Data definition (data specification)
Data definition (specify bit and set)
Data definition (specify bit and clear) Definition
Definition data (all data initialized)
• m:
• N:
• n1 n2 n3 n4:
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
# m N n1
1D 23 m N n1
29 35 m N n1
Class
Write
Write
Definition
Definition
Definition
Mode selection
Memory switch number to specify
Specify data
3-61
n2 n3 n4 LF NUL
n2 n3 n4 0A 00
n2 n3 n4 10 0
m N
"W" Fixed at "0"
"T" Fixed at "0"
", " N
"+" N
"-" N
"@" Fixed at "0"
m = (",") Specify data
m = ("+") Bit number to set
m = ("-") Bit number to clear
n1 n2 n3 n4
Fixed at "0000"
Fixed at "0000"
n1 n2 n3 n4
n1 n2 n3 n4
n1 n2 n3 n4
Fixed at "0000"