Character Expansion Settings - Star Micronics Line Thermal Printer Specifications

3.3.2.

Character Expansion Settings

ESC i n1 n2
[Name] Set/cancel the double wide/high
[Code] ASCII ESC
Hex. 1B
Decimal 27 105
[Defined Area] 0≤n1≤5
48≤n1≤53 ("0"≤n1≤"5")
0≤n2≤5
48≤n2≤53 ("0"≤n2≤"5")
[Initial Value] n1 = 0 (Double high cancelled)
n2 = 0 (Double wide cancelled)
[Function] Specifies/cancels double high/wide for ANK characters and Chinese characters.
This command is ignored if either n1 or n2 is outside of the defined area.
n1 Expanded high
0, 48 Cancels expanded high
1, 49 Specifies 2x high expansion
2, 50 Specifies 3x high expansion
3, 51 Specifies 4x high expansion
4, 52 Specifies 5x high expansion
5, 53 Specifies 6x high expansion
n2 Expanded wide
0, 48 Cancels expanded wide
1, 49 Specifies 2x wide expansion
2, 50 Specifies 3x wide expansion
3, 51 Specifies 4x wide expansion
4, 52 Specifies 5x wide expansion
5, 53 Specifies 6x wide expansion
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
i n1 n2
69 n1 n2
n1 n2
3-11