Presenter Related Command Details - Star Micronics Line Thermal Printer Specifications

3.8. Presenter Related Command Details

The following commands control the presenter functions.
The following commands are effective only on models equipped with a presenter.
ESC SYN 0 n
[Name] Execute presenter paper recovery
[Code] ASCII ESC SYN
Hex. 1B
Decimal 27
[Defined Area] n = 0
[Initial Value] - - -
[Function] Executes presenter paper recovery.
This command is ignored when a presenter is not connected.
Also, this command is executed when paper is supplied by the presenter, exists in the presenter
and the paper has been cut. This command is ignored with under all other conditions. (Ignored
when paper is being recovered.)
ESC SYN 1 n
[Name] Set presenter paper automatic recovery function and automatic recovery time
[Code] ASCII ESC SYN
Hex. 1B
Decimal 27
[Defined Area] 0≤n≤255
[Initial Value] Memory switch setting
[Function] Sets presenter paper automatic recovery function and automatic recovery time.
This command is ignored when a presenter is not connected.
Settings using this command are effective from the next sheet when the printer processes this
command and paper has already been supplied to the presenter.
N
n = 0
1≤n≤255
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
0 n
16 30 n
22 48 n
1 n
16 31 n
22 49 n
Functions
Paper automatic recovery function invalid.
Paper automatic recovery function valid.
Automatic recovery time: n x 0.5 sec (0.5 sec to 127.5 sec)
3-93