Star Micronics Line Thermal Printer Specifications page 125

ESC GS / 6 n
[Name] Set partial cut before Auto Logo printing
[Code] ASCII ESC GS
Hex.
Decimal
[Defined Area] 0 ≤ n ≤ 1
[Initial Value] n = 0
[Function] Sets a partial cut before the Auto Logo printing.
This command is registered to the non-volatile memory by the "<ESC> <GS> / W" command.
This command is ignored when Auto Logo is being executed.
n
0
1
When printing Logo2 and Logo3 as Auto Logo printing like the one in the drawing below, this
command selects to execute a partial cut before printing Logo2 of the Auto Logo and Logo3.
If a partial cut is executed using this function, it is possible to provide coupons, etc., that are printed
using Auto Logo with a partial cut.
1. Starts Auto Logo with trigger
o f cutting command.
2. Executes user macro 1.
3. Prints Auto Logo
4. Executes user macro 2.
- Executes cut.
- Executes Header logo
printing.
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
/ 6 n
1b 1d 2f 36 n
27 29 47 54 n
Setting
Does not execute a partial cut before the Auto Logo printing.
Executes a partial cut before the Auto Logo printing.
3-109
Header
***************
********************
M ACDONALDS
MACDONALDS
********************
***************
1.CHEESEBURGER $2.00
1. CHEESBUGER $2. 00
2.COKE $1.00
2. CO KE $1. 00
--------------------------------------
----------------------
TOTAL $3.00
TO TAL $3. 00
Cheeseburger
Header
COKE
Header
********************
MACDONALDS
Partial Cut
Prints Logo 2
Partial Cut
Prints Logo 3