Print Settings - Star Micronics Line Thermal Printer Specifications

3.3.13.

Print Settings

ESC RS d n
[Name] Set print density
[Code] ASCII ESC RS
Hex. 1B
Decimal 27
[Defined Area] 0≤n≤15
48≤n≤57 ("0"≤n≤"9")
65≤n≤70 ("A"≤n≤"F")
[Initial Value] Memory switch setting
[Function] Sets print density.
This command stops printing to be executed.
n Print density
0, 48 Print density 1.3
1, 49 Print density 1.2
2, 50 Print density 1.1
3, 51 Print density 1.0
4, 52 Print density 0.9
5, 53 Print density 0.8
6, 54 Print density 0.7
7, 55 (Reserved)
8, 56 (Reserved)
9, 57 (Reserved)
10, 65 (Reserved)
11, 66 (Reserved)
12, 67 (Reserved)
13, 68 (Reserved)
14, 69 (Reserved)
15, 70 (Reserved)
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
d n
1E 64 n
30 100 n
3-50