Star Micronics Line Thermal Printer Specifications page 63

ESC GS BEL m t1 t2
[Name] Ring buzzer
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] 1≤m≤2
1≤t1≤255
1≤t2≤255
[Initial Value] - - -
[Function] Rings the buzzer.
m specifies the drive terminal of the buzzer.
m Buzzer Drive Terminal
1, 49 Buzzer Drive Terminal 1
2, 50 Buzzer Drive Terminal 2
t1 specifies energizing time; t2 specifies the delay time.
• Energizing time = 20 msec x t1
• Delay time = 20 msec x t2
The buzzer will not ring while printing.
Use of this command other than for ringing the buzzer is prohibited.
(There is the possibility of damage if using this command for driving the drawer on models that
support external device terminals.)
D rive Pulse
Print Operation
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
GS BEL m t1 t2
1D 07 m t1 t2
29 7 m t1 t2
ON
OFF
20 × t1 (m sec)
(Energizing Tim e)
Printing and Paper Feed Prohibited
3-47
20 × t2 (m sec)
(D elay Tim e)