Star Micronics Line Thermal Printer Specifications page 76

ESC @
[Name] Command initialization
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] - - -
[Initial Value] - - -
[Function] Initializes each command after printing data in the line buffer.
However, printers with memory switch settings are initialized to the memory switch settings.
DIPSW re-reading is not performed.
• ANK characters, Chinese character adornment, expansion
• Chinese character mode
• ANK right space
• Chinese character left/right spaces
• Character pitch
• International characters
• Code page
• Set slash zero
• Set specify/cancel external character (external register character data is retained)
• Page length
• Current position (move to top of page, top of line)
• Horizontal tab/Vertical tab
• Line feed amount
• Set upside-down, position alignment
• Left/right margins
The following shows the specifications that are not initialized by this command.
• Set print density
• Set print speed
• Set 2 color print mode
• Print color in 2 color print mode
• External device drive condition
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
@
40
64
3-60