Star Micronics Line Thermal Printer Specifications page 88

ESC * r m l n NUL
[Name] Set raster left margin
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] - - -
[Initial Value] n = 0
[Function] Sets raster left margin.
This command sets the left margin to (n x 8).
When the left margin exceeds the printable area, or if the left margin specification eliminates the
print area (printable region to right margin) to the left margin specified value, this command is
ignored.
n is a decimal description (max. 255 digits) using ASCII characters.
ESC * r m r n NUL
[Name] Set raster right margin
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] - - -
[Initial Value] n = 0
[Function] Sets raster right margin.
This command sets the right margin to (n x 8).
When the right margin exceeds the printable area, or if the right margin specification eliminates the
print area (printable region to left margin) to the right margin specified value, this command is
ignored.
n is a decimal description (max. 255 digits) using ASCII characters.
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
* r m l n
2A 72 6D 6C n
42 114 109 108 n
* r m r n
2A 72 6D 72 n
42 114 109 114 n
3-72
NUL
00
0
NUL
00
0