Color Printing Command Details - Star Micronics Line Thermal Printer Specifications

3.7. 2 Color Printing Command Details

The following commands control 2 color printing functions.
The following commands are effective only when using a model handling 2 color printing.
ESC RS c n
[Name] Set print color in 2 color print mode
[Code] ASCII ESC RS
Hex. 1B
Decimal 27
[Defined Area] 0≤n≤1
48≤n≤49 ("0"≤n≤"1")
[Initial Value] n = 0, 48 (When in 2 color print mode)
[Function] Specifies print color in 2 color print mode.
This command is ignored when not in the 2 color print mode.
Specifies black for the print color when in 2 color print mode.
This command is cleared only when the printer is reset.
The specification of this command is not cleared by ESC @ CAN.
However, print color is initialized to black by the ESC @ and CAN only when in the compatible 2
color print mode.
n Specifies 2 color print mode color
0, 48 Black
1, 49 Red
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
c n
1E 63 n
30 99 n
3-84