Printer Driver; Control Command Details - Star Micronics NP-226 Product Specifications

5.2 Printer driver

Please apply the driver stated below for using NP-325R under Windows environment. Refer to the
User's Manual for a driver.
1) Windows 95/98: NII printer driver Windows 95/98, Version 1.00
2) Windows NT4.0: NII printer driver Windows NT4.0, Version 1.00
3) Windows 2000/XP: NII printer driver Windows 2000/XP, Version 1.00
4) Windows 2000/XP: NII printer driver Windows 2000/XP USB, Version 1.00

5.3 Control command details

1) Horizontal tab
Code
Shift the print position to the next horizontal tab position
* Horizontal tab position is set by [horizontal tab set] command.
* The default of horizontal tab position is every 8th character (9th digit,
17th digit, 25th digit and 33rd digit) in font A.
* Maximum digit position for NP226 is 33
* If the next tab position is not set, this command is ignored.
2) Carriage return
Code
This command is ignored.
3) Line feed : << LF >>
Code
Prints data stored in the input buffer and executes line feed according to data
of feed pitch.
4) Page feed : << FF >>
Code
* Prints data in the print line buffer and executes page feed to the head of next page
according to the page length in the setting.
5) "n" line page length setting: << ESC C n >>
Code
Sets a page length for "n" lines with current line feed pitch.
* Position is set to the head of page
* Line pitch change after setting will not change page length.
* Default value for "n" is [42] h for 66 lines.
* If printer is initialized, the head of page is also initialized.
6) Setting right space of a character: << ESC SP n >>
Code
Sets the right space of a character by unit of dot (1/203 of an inch). In the case of
double width mode, the space will be doubled. The default value of "n" is [00] h.
D-F0390 NP-326 Product specifications Ver.0.02
: << HT >>
: [09] h
: << CR >>
: [0D] h
: [0A] h
: [0C] h
: [1B] h + [43] h +n
: [1B] h + [20] h + n
rd
and for NP-326 is 41
* [01≤n≤FF] h
* [00≤n≤20] h
22
st
.