Star Micronics Line Thermal Printer Specifications page 134

The following is an example showing the sending of the commands.
(1) Set bar code type
<ESC> <GS> "y" "S" "0" 1
<ESC> <GS> "y" "S" "1" 0
<ESC> <GS> "y" "S" "2" 3
(2) Set bar code data
• <ESC> <GS> "y" "D" "1" 0 20 0
• <ESC> <GS> "y" "D" "2" 10
(3) Print bar code
To verify whether to print with the current settings, check the bar code expansion information.
<ESC> <GS> "y" "I"
<ESC> <GS> "y" "p"
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
Sets to model 1.
Sets mistake correction level to L.
Sets cell size to 3 dots.
"2005, January, 1 (SAT)" <LF>
Sets bar code data (Data automatic analysis)
Sets bar code data (Data manual analysis)
1 4 0 "2005" ","
4 2 0 "Year" ","
1 1 0 "1" ","
4 2 0 "Month" ","
1 1 0 "1" ","
4 2 0 "Day" ","
4 2 0 "(" ","
2 3 0 "SAT" ","
4 2 0 ")" ","
3 1 0 <LF>
Check bar code expansion information
Print
3-118