Star Micronics Line Thermal Printer Specifications page 58

• n4 bar code height (dot count)
Specification A
When the height of the bar code is more than the form feed amount, the form feed amount is
automatically doubled.
Specification B
Form feed at (Bar code height + underbar characters)
• k (Bar code data count), d (Bar code data)
Bar code type
UPC-E
UPC-A
JAN/EAN8
JAN/EAN13
Code39
ITF
Code128
Code93
NW-7
• UPC – E: k = 11 (or 12)
The 12
The command is ignored for data that cannot be shortened.
Automatically converts data to shortened form.
• UPC – A: k = 11 (or 12)
The 12
• JAN/EAN – 8: k = 7 (or 8)
The 8
• JAN/EAN -13: k = 12 (or 13)
The 13
• CODE 39: k is freely set, and maximum value differs according to the mode.
Start/stop code ("*") is automatically applied.
• ITF: k is freely set, and maximum value differs according to the mode.
If data is oddly numbered, a 0 is applied to the top.
• CODE 128: k is freely set, and maximum value differs according to the mode and the print
character type.
The check character is automatically applied.
• CODE 93: k is freely set, and maximum value differs according to the mode and the print
character type.
The check character ("□") is automatically applied.
• NW7: k is freely set, and maximum value differs according to the mode and the print character
type.
Start/stop codes included in the data (not automatically applied).
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
Defined area of k
11≤k≤12
11≤k≤12
7≤k≤8
12≤k≤13
1≤k
1≤k
When an odd number: 0 is
automatically applied to the
top.
1≤k
1≤k
1≤k
th
check digit is automatically applied, so it is specified and ignored.
th
check digit is automatically applied, so it is specified and ignored.
th
check digit is automatically applied, so it is specified and ignored.
th
check digit cannot be automatically applied, so it is specified and ignored.
3-42
Defined area of d
48≤d≤57 ("0"≤d≤"9")
48≤d≤57 ("0"≤d≤"9")
48≤d≤57 ("0"≤d≤"9")
48≤d≤57 ("0"≤d≤"9")
48≤d≤57 ("0"≤d≤"9")
65≤d≤90 ("A"≤d≤"Z")
32, 36, 37, 43, 45, 46, 47 (SP, "$", "%", "+", "-", ".", "/")
48≤d≤57 ("0" ≤ d≤"9")
0≤d≤127
0≤d≤127
48≤d≤57 ("0"≤d≤"9")
65≤d≤68 ("A"≤d≤"D")
36, 43, 45, 46, 47, 58 ("$", "+", "-", ".", "/", ":")
97, 98, 99, 100 ("a", "b", "c", "d")