Star Micronics Line Thermal Printer Specifications page 116

ESC GS * W
[Name] Register mark format to non-volatile memory
[Code] ASCII ESC GS
Hex. 1B
Decimal 27
[Defined Area] - - -
[Initial Value] - - -
[Function] Registers the mark format (mark height, mark line feed amount, each mark color, and each mark
horizontal width) to the non-volatile memory.
After registering to the non-volatile memory, the printer is reset.
ESC GS * C
[Name] Initialize mark format in the non-volatile memory
[Code] ASCII ESC GS
Hex. 1B
Decimal 27
[Defined Area] - - -
[Initial Value] - - -
[Function] Initializes the registered mark format (mark height, mark line feed amount, each mark color, and each mark
horizontal width) in the non-volatile memory. After initialization, the printer is reset.
Initial Value of the Mark Format
• Mark Height::
• Mark line feed amount::
• Mark color:
• Mark horizontal width:
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
* W
1D 2A 57
29 42 87
* C
1D 2A 43
29 42 67
"016" 16 dots
"032" 32 dots
"0" (White → All mark numbers)
"080" 80 dots → All mark numbers)
3-100