Star Micronics Line Thermal Printer Specifications page 50

ESC L n1 n2 d1...dk
[Name] Standard density bit image
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] 1 ≤ (n1 + n2 x 256) ≤ printable region
k = (n1 + n2 x 256)
0≤d≤255
[Initial Value] - - -
[Function] Prints bit images using 1 dot wide and 3 dots high per 1 dot of input data.
The following shows the data processing in this command.
• When (n1 + n2 x 256) exceeds the printable region, data after d1 is handled as normal data.
• When (n1 + n2 x 256) exceeds the printable region that is currently set, only the data in the
printing region is printed.
At this time, all data for the print region is discarded.
• If the current position already exceeds the print region, this command discards all data.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
L n1 n2 d1 ...
4C n1 n2 d1 ...
76 n1 n2 d1 ...
b7 b6 b5 b4
3-34
dk
dk
dk
b3 b2 b1 b0