Star Micronics Line Thermal Printer Specifications page 34

SI
[Name] Select upside-down printing
[Code] ASCII SI
Hex. 0F
Decimal 15
[Defined Area] - - -
[Initial Value] Upside-down cancelled
[Function] Specifies upside-down printing
This command is enabled only when at the top of the line.
Upside down and right-side up characters cannot both exist in the same line.
This command is enabled for following.
• ANK characters
• Chinese characters
• Bit images
• Logos
• Bar codes
DC2
[Name] Cancel upside-down printing
[Code] ASCII DC2
Hex. 12
Decimal 18
[Defined Area] - - -
[Initial Value] Upside-down printing cancelled
[Function] Cancels upside-down printing
This command is enabled only when at the top of the line.
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-18