Command Details - Star Micronics NP-266S Product Specifications

5.3 Command details

1) Horizontal tab
Code
Shift the print position to the next horizontal tab position
* Horizontal tab position is set by [horizontal tab set] command.
* The default of horizontal tab position is every 8th character (9
th
17
* Maximum digit position for NP266S is 33
* If the next tab position is not set, this command is ignored.
2) Carriage return
Code
This command is ignored.
3) Line feed : << LF >>
Code
Prints data stored in the input buffer and executes line feed according to data
of feed pitch.
4) Page feed : << FF >>
Code
* Prints data in the print line buffer and executes page feed to the head of next page
according to the page length in the setting.
* Default value for "n" is [42] h. "n" of line page length can be set by "ESC c n" command.
(Next command)
5) "n" line page length setting: << ESC C n >>
Code
Sets a page length for "n" lines with current line feed pitch.
* Position is set to the head of page
* Line pitch change after setting will not change page length.
* Default value for "n" is [42] h for 66 lines.
* If printer is initialized, the head of page is also initialized.
6) Setting right space of a character: << ESC SP n >>
Code
Sets the right space of a character by unit of dot (1/203 of an inch).
In the case of double width mode, the space will be doubled.
The default value of "n" is [00] h.
D-F0399 NP-266S/366S Specifications Ver.0.01 Provisional
: << HT >>
: [09] h
digit, 25th digit and 33rd digit, 41
: << CR >>
: [0D] h
: [0A] h
: [0C] h
: [1B] h + [43] h +n
: [1B] h + [20] h + n
st
digit) in font A.
rd
and for NP-366S is 41
* [01≤n≤FF] h
* [00≤n≤20] h
20
th
digit,
st
.