Star Micronics Line Thermal Printer Specifications page 102

Specification B
n Select/cancel 2 color print mode
0, 48 Cancels 2 color print mode
This command cancels 2 color print mode, when in 2 color print mode.
This command is ignored when the 2 color print mode is already cancelled.
The specification of this command is not cleared by ESC @ CAN.
The following processes are executed by canceling the 2 color print mode using this
command.
• Prints data in line buffer in 2 color print mode, if unprinted data exists in the line buffer.
• Waits to stop printing when printing in 2 color print mode.
• Recovers print density setting to single color mode setting.
• Recovers print speed to single color mode setting.
• Recovers logo print setting to single color mode setting.
1, 49 Selects 2 color print mode
This command selects 2 color print mode, when in single color print mode.
This command is ignored already in the 2 color print mode.
The specification of this command is not cleared by ESC @ CAN.
The following processes are executed by selecting the 2 color print mode using this command.
• Prints data in line buffer in single color print mode, if unprinted data exists in the line buffer.
• Waits to stop printing when printing in single color print mode.
• Initializes print color setting (2 color print mode setting)
• Initializes print density setting (memory switch setting)
• Sets logo print setting to 2 color mode setting.
Specification C
n Specify print mode
0, 48 Single color print mode
1, 49 2-color print mode
2, 50 Dot compatible 2-color mode
16 Low power consumption mode
32 Double resolution mode
• If set to the low power consumption mode using the DIP switches, this command is ignored.
• This command is not cleared by ESC @, CAN.
• When there is unprinted data in the line buffer, print the line buffer data.
• This command is processed after ending the current print job.
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-86