Star Micronics Line Thermal Printer Specifications page 40

VT
[Name] Feed paper to vertical tab position
[Code] ASCII VT
Hex. 0B
Decimal 11
[Defined Area] - - -
[Initial Value] - - -
[Function] Feeds paper to the next vertical tab position.
This command is ignored if there are no tabs set.
If a vertical tab is set, and the current position is the same as the vertical tab position, or if it is
below that position, it feeds paper to the top of the next page.
If data exists in the line buffer when feeing paper to the vertical tab position, it executes the paper
feed to the vertical tab position after printing that data. However, if moved to the vertical tab
position by printing data remaining in the buffer, the move to the vertical tab position is considered
to have been executed, so a move to the next vertical tab position is not performed.
There is no initial value for the vertical tab.
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-24