Star Micronics Line Thermal Printer Specifications page 124

ESC GS / 5 n
[Name] Set command character switching method
[Code] ASCII ESC GS
Hex.
Decimal
[Defined Area] 0 ≤ n ≤ 1
[Initial Value] n = 0
[Function] Sets the Auto Logo function command character switching method.
This command is registered to the non-volatile memory by the "<ESC> <GS> / W" command.
This command is ignored when Auto Logo is being executed.
n
0
1
When "/" is specified as the command character, the "/2" embedded in the print data is not a
character string, but processed as a command.
At this time, "/2" is processed as a command is not printed.
However, by specifying n = 1 in this command, it is possible to switch "/2" to a space.
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
/ 5 n
1b 1d 2f 35 n
27 29 47 53 n
Setting
Does not print the command character and the following logo number
Switches the command character and the following logo number into a space
character (0 x 20)
3-108