Star Micronics Line Thermal Printer Specifications page 93

ESC FF NUL
[Name] Execute FF mode
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] - - -
[Initial Value] - - -
[Function] Executes FF mode.
Executes operation specified by the FF mode setting command (ESC * r F n NUL).
ESC FF EOT
[Name] Execute EOT mode
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] - - -
[Initial Value] - - -
[Function] Executes EOT mode.
Executes operation specified by the EOT mode setting command (ESC * r E n NUL).
ESC * r N n NUL
[Name] Discard data for specified byte count
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] 1 ≤ n ≤ 2 5 5
[Initial Value] - - -
[Function] Discards data for the specified byte count.
Discards data received after a byte count specified by n.
n is expressed in decimal (maximum 4 digits) using ASCII characters.
This command is effective only in raster mode.
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
FF NUL
0C 00
12 0
FF EOT
0C 04
12 4
* r N n NUL
2A 72 4E n 0
42 114 78 n 0
3-77