Table of Contents
Advertisement
10.3 FILE MENU
•
Each line contains the value's ID number, the value, and a brief description of the quantity. Each item on the line is sep-
arated by spaces.
•
There is one section for each test.
Verify file can be re-opened:
•
Close the test file that was just saved.
•
Open the saved test file.
•
Select the menu item for the test.
•
Verify that the quantities in the dialog box are the same as in the test just saved.
Create a new test. Select Save Input Quantities from the "File" menu. The Save Input Quantities As dialog box will be
displayed. Enter a name for the test and select the OK button. The test is saved.
Verify the saved test as above.
This menu item results in a dialog box supplied by Microsoft. Therefore only the "OK" button of the dialog box is tested.
Select Save Input Quantities As from the File menu. Select a drive, path, and file name to save the input quantities of
test.
Verify that this item worked by following the same procedure as for the Save Input Quantities menu item.
This menu item results in a dialog box supplied by Microsoft. Therefore only the "OK" button of the dialog box is tested.
Select Save Output As from the File menu. Select a drive, path, and file name from the dialog box to save the test output.
Click on OK and the file is saved.
This menu item results in a dialog box supplied by Microsoft. Therefore only the OK button of the dialog box is tested.
Select Print from the File menu. This is a standard MS-Windows dialog box. It behaves however Microsoft and MS-Win-
dows determines it should behave. There is one exception, both the Selection and Pages buttons are disabled. Click on
OK. The output is printed as it appears on the screen.
This menu item results in a dialog box supplied by Microsoft. It can be tested only to the extent that it does get displayed
and that it behaves in the same manner as other similar dialog boxes in other programs.
Select Print Setup from the File menu. This is a standard MS-Windows dialog box. It behaves however Microsoft and Win-
dows determines it should behave.
The last 4 opened settings files are displayed in the File menu, and may be selected here.
Save all open test files (windows). Select Exit from the File menu. The program exits.
If you have not saved the current file, select Exit from the File menu. A message box is displayed asking if you want to
10
save the modified test. Click on OK. The program saves the file and exits.
10-10
ALPS Advanced Line Protection System
10 ALPS TEST PROGRAM
10.3.6 SAVE INPUT QUANTITIES AS
10.3.7 SAVE OUTPUT AS
10.3.9 PRINT SETUP
10.3.10 LAST 4 OPENED SETTINGS FILES
GE Power Management
10.3.8 PRINT
10.3.11 EXIT
Advertisement
Table of Contents
