Replace Front Panel; Equipment Required; Replacement Procedure - Honeywell Thor VM2 User Manual

Replace Front Panel

The front panel of the Thor VM2 is field replaceable. The front panel assembly contains
the integrated keypad and touch screen. Should either of these components fail, the
front panel assembly can easily be replaced to reduce downtime.

Equipment Required

The following equipment is user-supplied:
•
•

Replacement Procedure

Caution: Before replacing the Thor VM2 front panel,
1. Place the Thor VM2 on a clean, well-lit sur-
2. Shutdown the Thor VM2.
3. Remove the Thor VM2 from the dock.
4.
5. Loosen the twelve (12) captive M3 screws
6. Carefully lift the front panel away from the
7. Position the replacement front panel so wiring connector on the back of the front
8. Gently press the front panel into place.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Torquing tool capable of measuring inch pounds
#2 Phillips screwdriver bit
Battery.
face before performing the front panel
replacement.
Disconnect UPS Battery.
holding the front panel. Use a #2 Phillips bit.
device.
Wiring Connector
on Thor VM2
panel lines up with the connector on the Thor VM2.
Disconnect UPS
8
1
9
12
3
6
Wiring Connector
on Front Panel
5
4
11
10
2
7
139