Honeywell Thor VM2 User Manual page 253

PEAP-TLS
To use PEAP-TLS, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set Auth Type to Open
3. Set WPA as follows:
•
•
4. Set Encryption to either TKIP/AES or AES-CCMP depending on WPA type selected
5. Set Authentication to PEAP-TLS
See
Scroll down to enter credentials.
•
•
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Select WPA/WPA2 to use either TKIP/AES or AES-CCMP
Select WPA2 to use AEX-CCMP
Sign-On vs. Stored Credentials
No entries except the User Certificate Filename and the CA Certificate Filename are
necessary for Sign-On Credentials as the user will be prompted for the User Name
when connecting to the network.
For Stored Credentials, User Certificate Filename and the CA Certificate Filename
must be entered.
for information on entering credentials.
247