Honeywell Thor VM2 User Manual page 49

Since the keyboard is a USB device, by default the external keyboard backlight is turned
off when the Thor VM2 enters Standby/Sleep. This behavior can be changed by
enabling USB power in Standby/Sleep on the
21-key Numeric Keypad
A numeric keypad is available for the Thor VM2 in applications where a full keyboard
may not be needed. The USB keyboard connects directly to the D9 USB connector
(Standard Dock) or USB1 connector (Enhanced Dock).
Keyboard Backlight
The keyboard backlight key has a light bulb icon.
The keyboard keys are backlit. The keyboard backlight is manually controlled using the
backlight key in the upper right hand corner of the keyboard. Pressing the backlight key
cycles the keyboard backlight through the levels of backlight intensity: Off, Low inten-
sity, Medium intensity, Maximum intensity, Off, etc. When the Thor VM2 is powered on,
the keyboard backlight defaults to Off.
Since the keyboard is a USB device, by default the external keyboard backlight is turned
off when the Thor VM2 enters Standby/Sleep. This behavior can be changed by
enabling USB power in Standby/Sleep on the
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Options control panel.
Options control panel.
49