Honeywell Thor VM2 User Manual page 243

WPA/LEAP
To use WPA/LEAP, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set Auth Type as follows:
•
•
3. Set WPA as follows:
•
•
4. Set Encryption to either TKIP/AES or AES-CCMP depending on WPA type selected
5. Set Authentication to LEAP
See
Scroll down to enter credentials. No entries are necessary for Sign-On Credentials as
the user will be prompted for the Username and Password when connecting to the net-
work.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
If the Cisco/CCX certified AP is configured for open authentication, set Auth Type to
Open.
If the AP is configured to use shared key or passphrase, set Auth Type to Shared.
Select WPA/WPA2 to use either TKIP/AES or AES-CCMP
Select WPA2 to use AEX-CCMP
Sign-On vs. Stored Credentials for information on entering credentials.
237