Honeywell Thor VM2 User Manual page 16

First Boot
The first boot (also known as the Out of Box Experience) provides initial configuration of
the Thor VM2. When a Thor VM2 is ordered with a Windows 7 Professional or Windows
Embedded 7 operating system, the product key is printed on a decal on the rear of the
Thor VM2. It may be necessary to remove the Thor VM2 from the dock to view the prod-
uct key decal. Under normal circumstances, it is not necessary to re-enter the product
key as it was entered during the manufacturing process. If the Thor VM2 was ordered
without an operating system, a product key must be provided by the customer to acti-
vate Windows.
When a new Thor VM2 starts up a EULA (End User License Agreement) may be dis-
played on the touch screen. It remains on the screen until the Accept or Decline button
is tapped with a stylus.
Tap the Accept button to accept the EULA terms and the Thor VM2 continues the
startup process. The EULA is not presented to the user again.
Tap the Decline button to decline the EULA and the Thor VM2 reboots. It will continue
to reboot until the Accept button is tapped with the stylus.
Software Setup
Hardware setup should be completed before starting software setup.
1. If prompted, perform
2.
3. Adjust
4. Pair
5. Set wireless client parameters using the
6. Set terminal emulation parameters.
6 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
operating system language cannot be changed without reinstallation using a
recovery DVD. Recovery DVDs may also be available for additional languages.
Contact Technical Assistance
installed is identified on the Software tab of the
Select a Power Scheme or Power Plan
Speaker Volume.
Bluetooth devices
to order a Thor VM2 Recovery
Touch Screen Calibration.
and set timers.
Summit Client
DVD. The language
About control panel.
Utility.