Honeywell Thor VM2 User Manual page 238

PEAP/MSCHAP
To use PEAP/MSCHAP, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set Auth Type to Open
3. Set WPA as follows:
•
•
4. Set Encryption to either TKIP/AES or AES-CCMP depending on WPA type selected
5. Set Authentication to PEAP-MSCHAP
See
Scroll down to enter credentials:.
•
•
Enter these items as directed below.
232 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Select WPA/WPA2 to use either TKIP/AES or AES-CCMP
Select WPA2 to use AEX-CCMP
Sign-On vs. Stored Credentials
No entries except the CA Certificate Filename are necessary for Sign-On Credentials
as the user will be prompted for the User Name and Password when connecting to the
network.
For Stored Credentials, User, Password and the CA Certificate Filename must be
entered.
for information on entering credentials.