External 60-Key Keyboard; 60 Key Keymap 101-Key Equivalencies - Honeywell Thor VM2 User Manual

External 60-Key Keyboard

The key map table that follows lists the commands used when using the Thor VM2 with
the
The 60-key keyboard does not have a NumLock indicator or key. NumLock can be tog-
gled On or Off using the 2nd SHIFT F10 keypress sequence. The default for NumLock is
On. Changes made to the NumLock status persist across a Windows restart.
When running RFTerm, please refer to the RFTerm Reference Guide for equivalent keys
and keypress sequences.

60 Key KeyMap 101-Key Equivalencies

•
•
•
•
To get this Key / Function
Power On/Off
2nd
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
60-key PS/2 Keyboard.
The following keymap is used on a Thor VM2 that is NOT running RFTerm.
When using a sequence of keys that includes the 2nd key, press the 2nd key first then
the rest of the key sequence.
When the Thor VM2 boots, the default condition of Caps (or CapsLock) is Off. The
Caps (or CapsLock) condition can be toggled with a 2nd + F1 key sequence. The
CAPS LED is illuminated when CapsLock is On. The keymaps below assume Caps is
Off.
The Thor VM2 keyboard has several control keys. The following control keys are not
used:
◦ The 2nd function of the F3 key is not used as Windows Power Management
controls all power management modes on the Thor VM2.
◦ The 2nd functions of the F4 and F5 keys are not used as the display brightness is
adjusted via the buttons on the front of the Thor VM2.
◦ The 2nd functions of the F6 and F7 keys are not used as the Thor VM2 has TFT
LCD screen with no provision for contrast adjustments.
◦ The 2nd functions of the F8 and F9 keys are not used as the sound volume on the
Thor VM2 is controlled with a Microsoft Windows Control Panel.
◦ The 2nd function of the F10 key is not used as the display backlight timer also
controls the keyboard backlight.
Press These Keys in this Order
Power
2nd
325