Vmxd Enhanced Dock For Off-Vehicle Use (Qm3Ac) - Honeywell Thor VM2 User Manual

VMXD Enhanced Dock for Off-Vehicle Use (QM3AC)

Caution: This dock is designed for AC power (non vehicle-mounted)
applications only.
SKU
Power Connector
COM1Connector
COM2 Connector
CANBUS/AUDIO Connector
USB1 Connector
USB2 Connector
USB Host Connector
Ethernet
Power Switch
External Power Supply
Input Power
External Power Supply
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
VMX005VMCRADLE
6-pin connector:
15VDC input power via required AC/DC Adapter
9-pin male, RS-232 serial port, COM1 with power on pin 9
9-pin male, RS-232 serial port, COM2 with power on pin 9
15-pin male, CANbus/Audio connector supports either audio/microphone via adapter cable or
J1939 Female and J1939 Male connectors via CANbus cable
9-pin female, USB connector supports USB host port via adapter cable
Note: USB Client port may not be supported by the Thor VM2 operating system.
15-pin female, USB connector supports two USB host ports via adapter cable
One USB Host connector behind waterproof cap
One RJ45 Ethernet connector behind waterproof cap
Note: For Windows 7 and Windows Embedded Standard 7: An upgrade is necessary to
support the Ethernet port on this dock. See
Note: For Windows Embedded Standard 2009: The Ethernet port is not supported.
Sealed power switch
AC Adapter, 120-240VAC to 15VDC
DC Input Voltage: 15VDC,
Input Current: 4 Amps (maximum),
Input Fuse: 8A Time Delay. Replace with same size, rating and type of fuse:
• Littelfuse 0215008.MXP
• Cooper Bussmann BK1/S506-8-R
• Bel Fuse 5HT 8-R
or equivalent.
AC Adapter, 120-240VAC to 15VDC required
Note: This dock for use in AC power applications. See other docks for DC power applications.
Thor VM2 and Enhanced Dock Support.
335