Honeywell Thor VM2 User Manual page 180

View UPS Battery Status
Power Meter
Windows Embedded Standard 2009 only
(Start) > Control Panel > Power Options > Power Schemes tab (Classic View)
(Start) > Control Panel > Performance and Maintenance> Power Options > Power
Schemes tab (Category View)
On the Power Meter tab, battery #1 refers to the UPS battery.
Shows power status: external power or UPS battery and the total battery power remain-
ing before a recharge is necessary.
Power Notification Icon
Windows Embedded 7 and Windows 7 Professional only
The Power icon in the notification area provides an indication of the level of UPS battery
charge. The icon also indicates if external power is connected. Some samples are shown
below
Configure Power Button Behavior
Windows Embedded Standard 2009 only
(Start) > Control Panel > Power Options > Power Schemes tab (Classic View)
180 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
External power is connected and the UPS battery is approximately 50% charged.
External power not connected and the UPS battery is approximately 100% charged.