Honeywell Thor VM2 User Manual page 346

USB Host/Client Y Cable
D9 Male Connector
PIN 1 PIN 5
PIN 6 PIN 9
USB Host Connector
Pin
1
PIN 4
2
PIN 1
3
4
Shell
USB Client Connector
The USB client connection is not supported on the Thor VM2 with the Windows Embedded Standard
operating system.
342 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Pin Signal Description
1 GND Common ground
2 USBC_D+ USB client data signal (not used)
3 USBC_D- USB client data signal (not used)
4 USB_H1_PWR USB host 5V output power
5 GND Common ground
6 GND Common ground
7 USB_H1_D+ USB host 1 data signal
8 USB_H1_D- USB host 1 data signal
9 USBC_VBUS USB client 5V detect from attached host
Signal Description
5V_USB USB Power, Current Limited
USB_H1_D- USB D-
USB_H1_D+ USB D+
GND USB Power Return
CGND Chassis Ground