Usb Connector(S); Ethernet Connector - Honeywell Thor VM2 User Manual

USB Connector(s)

Standard Dock
An additional USB host port is located on the top of the Enhanced Dock. Lift the cover to
access the USB port.

Ethernet Connector

An Ethernet port is located on the top of the Enhanced Dock. Lift the cover to access the
Ethernet port.
Note: A BIOS and operating system upgrade is necessary to support the Ethernet port with the
Windows 7 or Windows Embedded Standard 7 operating systems. See
Enhanced Dock Support
44 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
COM1
COM2
USB
CANBUS/AUDIO
Enhanced Dock
for information.
The USB or USB1 connector is a D-
9 female connector located on the
back of the dock. See
USB1 Connector for connector pin-
out detail.
The USB client port is not sup-
ported with Windows Embedded
Standard 2009, Windows Embed-
ded Standard 7 or Windows 7 Pro-
fessional operating systems.
See Connect USB Host
information.
The USB-2 connector is a D-15
female connector located on the
back of the dock. See
Connector for connector pinout
detail.
Power the Thor VM2 off before
attaching a cable to any port (serial,
USB, Audio/CAN, etc.).
Thor VM2 and
USB and
for more
USB2