Honeywell Thor VM2 User Manual page 176

Thor VM2 is Off and Vehicle Ignition is Off
Conditions
The Thor VM2 is Off and vehicle ignition is Off.
Result
The Thor VM2 remains Off regardless of external power. UPS charging is disabled.
Conditions
The Thor VM2 has external power but vehicle ignition is Off. The power button is
pressed.
Result
The Thor VM2 boots. Once booted the Thor VM2 follows the Ignition Control/Ignition
Off power scheme/plan with timers reset after the boot completes.
Thor VM2 is On and Vehicle Ignition is Switched to Off
Conditions
The Thor VM2 is On and vehicle ignition changes from On to Off.
Result
The Thor VM2 follows the Ignition Control/Ignition Off power scheme/plan with timers
reset at the time Ignition switched to Inactive. UPS charging is disabled.
An example of this case would be a Thor VM2 that is running on UPS and is then
mounted on a dock that has truck power and the ignition switch is already Off.
176 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide