Replace The Ups Battery - Honeywell Thor VM1A User Manual

7. Reattach the access panel, torque the M3 screws to 4-5 inch pounds using a
8. When the computer is attached to external power, the UPS battery is
9. Press the Power button to turn on the computer.

Replace the UPS Battery

The UPS battery in the VM1A is field replaceable. Should the UPS battery fail, it can
easily be replaced to minimize downtime.
Equipment Required
The following equipment is user-supplied:
•
•
Replacement Procedure
Caution: Before replacing the Thor VM1A front panel,
1. Place the VM1A on a clean, well-lit surface before performing the UPS battery
2. Press and hold the Power button until the options menu appears. Tap Power
3. Remove the computer from the dock.
4.
Thor VM1A Vehicle-Mounted Computer
#2 Phillips bit.
automatically reconnected.
Torque tool capable of measuring inch pounds
#2 Phillips screwdriver bit
Battery.
replacement.
Off.
Disconnect the UPS Battery.
Disconnect the UPS
9