Honeywell Thor VM2 User Manual page 77

Step 7 - Attach Numeric Keypad (Optional)
This step is only for use with the Enhanced Dock.
1. Attach the accessory RAM ball to the Enhanced Dock. There are two mounting pro-
2. Attach the RAM ball to the back of the keypad.
3. Slip the RAM arm over the accessory RAM ball.
4. Slip the RAM ball on the keyboard into the RAM arm.
5. Tighten the knob on the RAM arm while adjusting to the desired angle.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
visions, one on either side of the Enhanced Dock and either can be used to mount
the numeric keypad.
Note: Some components omitted for detail clarity.
77