Honeywell Thor VM2 User Manual page 282

PEAP/MSCHAP
To use PEAP/MSCHAP, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set EAP Type to PEAP-MSCHAP
3. Set Encryption to WPA TKIP
4. Set Auth Type to Open
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for
encryption and complete other entries as detailed in this section.
See
Click the Credentials button.
•
•
Enter these items as directed below.
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Enter the password.
Leave the CA Certificate File Name blank for now.
276 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Sign-On vs. Stored Credentials
No entries except the CA Certificate Filename are necessary for Sign-On Credentials
as the user will be prompted for the User Name and Password when connecting to the
network.
For Stored Credentials, User, Password and the CA Certificate Filename must be
entered.
for information on entering credentials.