Honeywell Thor VM2 User Manual page 39

If the Thor VM2 is Full On, a press of the power button can be configured to put the unit
in Standby. See the
Button
Standby/Sleep Mode
This mode is called Standby in Windows Embedded Standard 2009. This mode is called
Sleep in Windows Embedded Standard 7 and Windows 7 Professional.
When the standby/sleep timer expires without a primary event occurring, the Thor VM2
transitions to Standby/Sleep mode. Pressing the power button exits Standby/Sleep
mode and transitions the Thor VM2 to Full On.
When in Standby/Sleep mode, the status LED:
•
•
By default, power is turned off to the USB port when the Thor VM2 is in Standby/Sleep
mode.
The Thor VM2 can be configured to provide power to the USB port in Standby/Sleep
using the
Note: Because the Thor VM2 with Windows Embedded Standard 7 or Windows 7 Professional
cannot transition from Sleep to Hibernate due to an operating system limitation, Sleep is
disabled by default in the predefined power plans. Power savings are significantly greater
using Hibernate.
System Standby/Sleep Wakeup Events
The following events transition the Thor VM2 from Standby/Sleep to Full On Mode:
•
•
•
Hibernate Mode
When the Thor VM2 enters hibernate mode, all LEDs are off. Pressing the power button
returns the Thor VM2 to Full On.
When in Hibernate Mode, the status LED:
•
•
Power is turned off to the USB port when the Thor VM2 is in Hibernate.
System Hibernate Wakeup Events
The following event transitions the Thor VM2 from Hibernate to Full On Mode:
•
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Advanced
Does, depending on the operating system installed.
blinks green very slowly if external power is attached.
is off if external power is not attached.
Options control panel.
Pressing and releasing the power button
Pressing or releasing any key on the integrated keypad
Tapping the touch screen.
blinks green very slowly if external power is attached.
is off if external power is not attached.
Pressing and releasing the power button.
tab of the Power control panel or Choose What the Power
39