Replace Front Panel; Equipment Required; Replacement Procedure - Honeywell THOR VM1 User Manual

Replace Front Panel

Front Panel Options
The front panel of the Thor VM1 is field replaceable. The front panel assembly contains the keypad, touch screen and
optional defroster. Should any of these components fail, the front panel assembly can easily be replaced to reduce down-
time. The replacement front panel is available in several configurations:
• 64-key ANSI keyboard with standard touch screen or cold storage touch screen

Equipment Required

The following equipment is user-supplied:
• Torquing tool capable of measuring inch pounds
• #2 Phillips screwdriver bit

Replacement Procedure

CAUTION - Before replacing the Thor VM1 front panel,
1. Place the Thor VM1 on a clean, well-lit surface before perform-
ing the front panel replacement.
2. Shutdown the Thor VM1.
3. Remove the Thor VM1 from the dock.
4. Disconnect UPS Battery
5. Loosen the fourteen (14) captive M3 screws holding the front
panel. Use a #2 Phillips bit.
6. Carefully lift the front panel away from the device.
Slot on Wiring Connector
Thor VM1 on Thor VM1
(page 4-60).
Disconnect UPS Battery (page 4-60).
7
9
5
11
Front Panel
2 4
1 3
13 12
Wiring Connector
Slot on
on Front Panel
4 - 63
6
10
8
14