Timing Gear, Camshaft, Gear Shaft And Pto Shaft - Kubota WG1605-G-E3 Workshop Manual

WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3, WSM

(5) Timing Gear, Camshaft, Gear Shaft and PTO Shaft

Fan Drive Pulley
1. Secure the flywheel to keep it from turning.
2. Remove the fan drive pulley screw.
3. Draw out the fan drive pulley with a puller.
(When reassembling)
• Apply engine oil to the fan drive pulley retaining screws. And
tighten it.
Tightening torque Fan drive pulley screw
Gear Case
1. Remove the gear case (1).
(When reassembling)
• Apply a liquid gasket (Three Bond 1215 or equivalent) to both
sides of the gear case gasket.
(1) Gear Case
Water Pump Assembly
1. Remove the water pump assembly (2) from the gear case
cover.
(When reassembling)
• Apply a liquid gasket (Three Bond 1215 or equivalent) to both
sides of water pump gasket (3).
(1) Water Pump Flange
(2) Water Pump Assembly
1-S32
ENGINE
235 to 245 N·m
24.0 to 24.9 kgf·m
174 to 180 lbf·ft
9Y1210661ENS0024US0
a: Bolt Length = 45 mm (1.8 in.)
b: Bolt Length = 50 mm (2.0 in.)
c: Bolt Length = 55 mm (2.2 in.)
d: Bolt Length = 65 mm (2.6 in.)
e: Bolt Length = 68 mm (2.7 in.)
g: Bolt Length = 85 mm (3.3 in.)
h: Nut
9Y1210661ENS0025US0
(3) Water Pump Gasket
9Y1210661ENS0104US0
KiSC issued 05, 2014 A